BNLQM - SOLID COLOR ACRYLIC STAIN, A2000
- MSDS: BNLQM
- Manufacturer: EVR GARD COATINGS CO
- Product Name: SOLID COLOR ACRYLIC STAIN, A2000
- National Stock Number: 8010-00N027234
Product Identification
Product ID:SOLID COLOR ACRYLIC STAIN, A2000
MSDS Date:01/01/1989
FSC:8010
NIIN:00N027234
MSDS Number: BNLQM
Responsible Party
PARAMOUNT, CA 90723
US
Emergency Phone: 213-531-0131
Info Phone: 213-531-0131
Cage: 5G582
Contractor
Telephone: 310-531-0131
Cage: 5G582
Ingredients
0.1 @ 68F. (SARA III)
CAS: 107-21-1
RTECS: KW2975000
OSHA PEL 50 PPM, C
ACGIH TLV: 50 PPM, VAPOR, C
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
PROPIONIC ACID, 2-METHYL-, MONESTER WITH
CAS: 25265-77-4
RTECS: UF6000000
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:MAY CAUSE HEADACHE & NAUSEA,
DIZZINESS. SKIN/EYE:PRIMARILY AN IRRITANT. REDNESS/RASH ON SKIN.
INGEST:NAUSEA, DIZZINESS, HEADACHES. PROLONGED INHALATION MAY CAUSE
HEADACHE AND NAUSEA.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PROLONGED CONTACT W/MATERIAL MAY
CAUSE DERMATITIS.
First Aid
First Aid:INHAL:REMOVE TO FRESH AIR. EYE:FLUSH W/CLEAN WATER FOR AT
LEAST 15 MINUTES. SKIN:REMOVE SATURATED CLOTHING & WASH SKIN
W/SOAPY WATER THOROUGHLY. INGEST:INDUCE VOMITING W/1-OZ OF SYRUP OF
IPECAC FOLLOW ED IN 5 MINUTES W/GLASS OF WATER. CALL MD.
Fire Fighting
Lower Limits:0.6%
Extinguishing Media:FOAM, ALCOHOL FOAM, CARBON DIOXIDE, DRY CHEMICAL,
WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . THIS IS A WATER-BASED PRODUCT. WILL NOT
SUPPORT COMBUSTION.
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:ABSORB SPILL W/ANY ABSORBENT MATERIAL-SAWDUST,
SAND, CLAYS, ETC., & FLUSH SPILL AREA W/LOTS OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:PRODUCT IS STABLE UNDER NORMAL USE AND
STORAGE CONDITIONS. KEEP OUT OF REACH OF CHILDREN. KEEP FROM
FREEZING.
Other Precautions:DO NOT TAKE INTERNALLY.
Exposure Controls
Respiratory Protection:USE OF NIOSH/MSHA APPROVED MASKS DURING
APPLICATION TO AVOID EXCESSIVE INHALATION OF VAPORS IS HIGHLY
RECOMMENDED. OPEN WINDOWS & DOORS OR USE OTHER MEANS TO INSURE
FRESH AIR ENTRY DURING APPLICATION & DRYING.
Ventilation:PROVIDE ADEQUATE VENT AT ALL TIMES DURING HNDLG &
APPLICATION OF PROD. INSURE ADEQUATE SUPPLY OF FRESH AIR AT ALL
TIMES.
Protective Gloves:BUNA N GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WEAR MASKS IF NECESSARY TO PREVENT PROLONGED
CONTACT W/MATERIAL.
Work Hygienic Practices:OBSERVE STANDARD HYGIENIC PRACTICES WHEN
HANDLING PRODUCT.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Vapor Pres:0.1(ING 1)
Vapor Density:HVR/AIR
Spec Gravity:1.3 (H*2O=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:DILUTABLE
Appearance and Odor:WHITE PAINT AND COLORS, SLIGHT AMMONIA SMELL.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND ALKALIS AND MATERIALS THAT REACT W/WATER.
Stability Condition to Avoid:DO NOT STORE IN HIGH TEMPERATURE AREAS.
Hazardous Decomposition Products:NONE
Disposal
Waste Disposal Methods:PLACE ALL HAZARDOUS WASTE,INCLUDING ABSORBENTS
USED FOR SPILLS,IN 55-GAL METAL DRUMS & DISPOSE IN APPROVED
DUMPSITE I/A/W PRESCRIBED FEDERAL, STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.